R3-2 Interfaces are designed to manage up to 32 networked Smart Antennas (Readers) on a single trunk line providing communication protocols of Allen Bradley’s Ethernet/IP, DeviceNet, Siemens Profibus & PROFINET, Modicon Modbus RTU & Modbus TCP, CANopen, as well as USB, Serial & TCPIP Ethernet.
125 KHz LF RFID Readers for R3-1 Standard Systems
SKU 7000 & 7050 Series
Our Model 7000 series Readers offer superior range for an LF 125 KHz product, normally deploying an external Antenna and is basic in its design of RS232, RS485, and USB communications.
125 KHz LF Specialty RFID Readers & Microreaders for R3-1 Standard Systems
SKU 3020 Series
Our line of LF 125 KHz Microreaders are designed for OEM opportunities allowing these RFID Readers to be built into a larger system, available as 5vdc or 24vdc versions with RS232 or TTL communications.
148 KHz LF simplex & Multiplex RFID Readers for R3 Systems
SKU 1840/1845 Series
Our Model 1840 and 1845 series of LF 148 KHz Readers are designed for use with an external RFID Antenna and should also be paired with one of the Model 2002/2022/2024 RFID Interfaces.
148 KHz LF simplex & Multiplex Combo RFID Readers/Antennas for R3 Systems
SKU 1880/1885 Series
Our Model 1880 and 1885 series of LF 148 KHz Readers are designed with the RFID Antenna as a part of its PCB and should also be paired with one of the Model 2002/2022/2024 RFID Interfaces.
148 KHz LF RFID Reader & Interface Combos for R3 Systems
SKU 4000/5000 Series
Our Model 4000/5000 series of 148 KHz Readers incorporates both the serial RFID Interface and RFID Reader components into a single package, needing only an external Model 51xx-148 RFID Antenna to complete the solution.
148 KHz LF Handheld RFID Readers & Programmers for R3 Systems
SKU 3036E-R3 Series
Convenient for testing Tags or used has a hand held LF 148 KHz RFID Tag Programmer, our Model 3036E-148 is easy to use with a single page set of instructions. Again, no software necessary with this self-operating unit.
ActiveRFID 433 MHz Readers have an internal RFID Antenna however external Antennas can be added to increase range. Data protocols include Wiegand, serial, and TCPIP Ethernet as well as Modbus RTU. The handheld RFID Reader included on this line can also act as an RFID Tag locater. Readers also have a range tuning feature.
This Reader ports up to 4 addressable RFID Antennas with USB and Serial communications standard on all models, and further offer standard Ethernet, Profinet, Profibus, Ethernet/IP, Devicenet, Modbus TCP & RTU. Two lines of I/O are also standard. This Reader can also write to RFID Tags and has a range tuning feature.
SPR/A stands for Single Piece Reader & Antenna, a single package integrating both RFID components and comes USB and Serial communications standard on all models, and further offer standard Ethernet, Profinet, Profibus, Ethernet/IP, Devicenet, Modbus TCP & RTU. Two lines of I/O are also standard. This Reader can also write to RFID Tags and has a range tuning feature.
These 13.56 MHz HF MicroReaders are intended for OEM opportunities, capable of operating with ISO 15693, 14443A or 14443B RFID Tags, offering USB or RS232 outputs and deliverable with internal or external RFID Antennas.
These 13.56 MHz HF RFID Readers are intended for OEM and full system installations, capable of operating on both ISO 15693 & ISO 14443 RFID Tags. The Model 3600E Factory Floor Readers also come with an on Board Modbus TCP Processor & internal Antenna.
Model 3048E Hand Held 915 MHz UHF RFID Reader accommodates either an Android or iPhone on its mounting accessory but on its own is capable of USB, Bluetooth, WPAN, Virtual COM, Bluetooth 4.0 dual mode, HID, EDR/BLE, acting as an SPP Slave or as a Master, reading UHF RFID Tags up to 5 meters.
Need to learn more before you make a decision about which RFID device to purchase? Start here. Our knowledge bank is always growing, so if you still have a question after visiting the resource center, then send us a question and we will add it to the center.